Passive Optical Device

    1. FTTXBuilding an FTTx network can be a daunting task as you have to prepare so many fiber optic components. Why not let XINSHENG take care of all your FTTx specifications and requirements? XINSHENG has been a dedicated one-source supplier of PLC splitter, jumper, and fiber optic adapter from day one.
    1. WDM (Wavelength Division Multiplexer)If a wavelength division multiplexer is what you want, then you are in luck. We at XINSHENG provide a broad range of fiber optic components --- including your WDM.
    1. Micro-optical DeviceMicro-optical devices are defined as fiber products with its diameter between 20 micrometers and 1 millimeter. Falling into this category are FBT splitters, optical isolators, and optical circulators, among various others.
    1. PLC Splitter

      As data arrives at the receiving end, they need to be separated to reach different users. That is where our PLC splitter comes into play.

      More >>At present, XINSHENG Electronics focuses solely on the production of PLC splitters, though many other manufacturers produce other types of couplers including the star coupler and tree coupler.
    1. Fiber Optic Patch Cord & Fiber Optic Pigtail

      High quality ceramic ferrules ensure the patch cable and the fiber pigtail have low insertion loss and full standards compliance.

      More >>Both the fiber optic patch cord and the fiber optic pigtail can be classified into different types according to the kinds of connectors attached to them: FC, SC, LC, MU, and ST. High quality ceramic ferrules ensure the patch cable and the fiber pigtail have low insertion loss and full standards compliance.
    1. Fiber Optic Fast ConnectorWe basically terminate fiber optic cable in two ways, one including the use of the fiber optic fast connector. XINSHENG fast connector is designed specifically for fiber-optic FTTx networks, where it is added to the end of each fiber of a multi-fiber cable for fast, reliable fiber-optic termination.
    1. Fiber Optic AdaptorThe fiber optic adaptor is a passive optical device that is usually placed between two connector plugs to form a plug-adaptor-plug connection. There are manufacturers who confuse the adaptor with the fiber optic coupler, which is quite misleading. What the adaptor does is to join two optical fibers together by physically aligning two connectors for mating.
    1. Fiber Optic Splice ClosureAs a leading FTTH components supplier, XINSHENG provides a total of 6 different splice enclosures to meet your specific pigtail splicing requirements. Mainly made of tough engineering plastics, this splice closure features a durable cover that contains anti-oxidants to fight against aging.
    1. Fiber Optic Distribution BoxThe fiber optic distribution box is an enclosure for beam splitting, splicing and termination of optical fibers. It provides protection to spliced fibers and manages fiber optic cables. XINSHENG optic fiber termination boxes boast of high quality, which have been widely found in operation on many fiber optic installation projects and at optic fiber maintenance job sites.
    1. CWDM (Coarse Wavelength Division Multiplexer)Choose a coarse wavelength division multiplexer to extend the reach of your light-wave signals! At its most basics, the coarse wavelength division multiplexing is a type of optical wavelength management device that is based on proven thin-film filter technology.
    1. DWDM (Dense Wavelength Division Multiplexer)The dense wavelength division multiplexer, or DWDM for short, is made with patented technology that enables an eco-friendly multiplexing and routing process which does not involve any heat production or changes in fiber temperature. This passive optical component offers ultra low insertion loss, superb thermal stability, and unparalleled reliability.
    1. FWDM (Filter Wavelength Division Multiplexer)

      The filter wavelength division multiplexer is widely used in optical network upgrade and expansion.

      More >>The thin-film filter based WDM is utilized to combine and separate optical signals in an FTTP network. The use of WDM technology expands the capacity of single fiber, as it allows multiple light signals to be conveyed at the same, in parallel and over single fiber.
    1. Optical Fused CouplerThe optical fused coupler goes by names. Fused fiber coupler and FBT splitter are just a couple. The word fused indicates that the coupler is made by fusing two adjacent fibers together to form a fused biconical taper coupler.
    1. Optical CirculatorThe polarization-insensitive optical circulator provides low insertion loss, broad band, high isolation, low PDL, excellent thermal stability, and epoxy-free optical channels. It can be used to as an add-drop multiplexer, dispersion compensator, or for EDFA applications.
    1. Optical IsolatorLow PMD means the rate at which data can be transmitted over a fiber can be very high. Epoxy-free optical path allows this isolator to be used in high optical power applications as it makes for low power loss. Made with micro-optics package technology, the polarization insensitive isolator delivers the best possible stability and reliability.
    1. Variable Optical AttenuatorSpecifically designed to cope with lights of 850nm, 1310nm or 1550nm in wavelength, XINSENG attenuator models can accept various styles of connectors, such as the FC square type, SC flanged type, ST threaded type, or LC square type connectors.

We provide a plug and play solution to meet the needs of today's passive optical network, or PON for short. At XINSHENG Electronics, a broad range of passive optical devices are available. Falling in this category are the wavelength division multiplexer, micro-optical device, and other passive optical components used with FTTx networks.

If you need to connect equipment at your premises to a cable television network, telecommunications network, data communications network, or local area network, and you are looking for passive optical devices, Changzhou Xinsheng Electronics has what you want.

We are a dedicated fiber optic device manufacturer. Whatever your fiber optics needs, we have the right fiber optic passive components for you. If you have a connection situation or circumstance not covered by our passive optical device, please contact us to access our custom design service to address your unique need.